Datavideo TLM-350 - Manual (Page 4)

12
FRONT PANEL
Power On / Off Select Video input
Adjust Brightness FLIP*
13
*The FLIP button has two functions:
Function 1: Push the button to change the display to a
horizontally mirrored image.
Function 2: Push the button again to change the display to a
up/down mirrored image.
Note: Push the button a third time to return to the standard
view.
14
REAR PANEL
mini DIN socket for DC input and Video inputs
15
OPERATION
Video Connections
The TLM-350 is supplied with a mini din adaptor cable which
plugs into the socket on the rear of the TLM-350. The adaptor
cable features two BNC sockets, one yellow and one black, for
video Inputs 1 and 2. There is also an in-line power connector
for connecting to the power supply or battery pack.
Connect the composite feed from your camera or video
playback device to one of the BNC sockets. If you have two
cameras / video playback devices connect one to each BNC
socket. You can use the V1 / V2 button, on the front of the
TLM-350, to switch between the two inputs.