Royer Labs Sling-Shock Microphone shock mount - Manual (Page 2)

Introduction
!
Thank you for purchasing this Royer product. Your Sling-Shock model RSM-SS1 or
RSM-SS24 was designed and built in Burbank, California by skilled technicians using
only the finest materials available. With proper care, this product will provide many years
of trouble-free service.
The Sling-Shock is a patented design and offers excellent isolation from vibrations
induced into the microphone through the microphone stand. There are no rubber
components to wear out and the Sling-Shock’s tension is fully adjustable, enabling it to
work effectively with microphones of various sizes and weight.
Like all products designed for a long service life, minor periodic maintenance is
recommended for long-term, consistent performance from your Sling-Shock.
Please read these instructions for a complete understanding of the use, care and
maintenance of this product.
!
!
Description & User Guide
!
Familiarizing yourself with the Sling-Shock RSM-SS1 & RSM-SS24
The RSM-SS1 is sized to fit Royer models R-121, R-122, R-122V, SF-1 and SF-12.
However, any cylindrical microphone measuring approximately one-inch in diameter will
work with the model RSM-SS1.
!
The RSM-SS24 is sized to fit Royer models SF-2, SF-2V,
SF-24, and SF-24V. However, any cylindrical microphone
measuring approximately one and one-half inches will
work with the model RSM-SS24
!
The Sling-Shock attaches to the microphone stand by way
of a threaded female mount consisting of standard 5/8 x 27
threads. The microphone stand adapter is constructed from
solid brass for long thread life and smooth operation. For
proper maintenance, the threads should be lightly greased
once a year.
!
Vertical axis positioning of this mount is achieved by way
of a clutch mechanism, with clutching pressure controlled
by an adjustable handle. Once tightened, the position of
this spring-loaded handle may be conveniently repositioned