Royer Labs R-122V - Manual (Page 23)

Electrical Specifications
Acoustic Operating Principle:
Electro-dynamic pressure gradient
Polar Pattern:
Figure-8
Generating Element:
2.5 micron aluminum ribbon
Frequency Range:
30HZ – 15,000HZ ± 3dB
Sensitivity:
-36dBv Ref 1 v/pa
Self Noise:
<18dB
Output Impedance:
200 Ohms balanced
Rated Load Impedance:
1000 Ohms minimum
Maximum SPL:
> 135dB
Microphone Cable:
7-Pin male to female XLR
Output Connector:
Male XLR 3 pin (pin 2 hot)
Vacuum Tube:
5840-W miniature type with wire leads
Power Requirements:
100-120 VAC 50-60HZ, 220-240 VAC 50-60HZ
Fuse Type (2 Slo-Blo):
Located in IEC power connector
200-ma for 110-120 volts, 100-ma for 220-240-volts
All Royer monaural microphones are also available in matched pairs.
Mechanical Specifications
High-grade Neodymium magnet assembly in Royer’s patented Flux-Frame
1.5” x 3/16” x 2.5-micron ribbon assembly
Stainless steel internal baffle and dampener
Dimensions:
206 mm L x 25 mm W (8-1/8” L x 1” W)
Microphone Weight:
10.2 oz, 290 g
Power Supply Weight:
3.5 lbs, 1.6 Kg
Shipping Weight:
15.5 lbs, 7 Kg
Finish:
Dull Satin Nickel, Matte Black Chrome or Gold Plate
Accessories:
Dedicated power supply, 7-Pin microphone cable, AC line cord,
protective wooden case, protective mic sock, RSM-1 shock-mount,
23