ROHO AirLIT cushion - Manual (Page 6)

4
Cushion and Cover Placement
Note: Refer to the label on the bottom of
the cushion and to the image on the cover
to correctly orient your cushion and cover.
Cushion Placement:
1. Place the cushion directly on the seat.
Note: If a seat insert is used, place it
inside the cover, beneath the foam base.
When possible, use the hook or
loop fasteners to further secure the
cover to the seating surface.
2. Have the individual sit on the cushion,
making sure the boniest prominences are supported by the air cells.
Check to make sure that the cushion is properly sized to the individual and the
wheelchair.
Cover Removal: Unzip the cover. Remove the cover from the cushion.
Cover Placement:
1. Unzip the cover.
2. Insert the cushion into the cover, front
edge first, with the contoured foam
facing up.
3. Close the zipper.
Inspect the cover for damage and replace if necessary.
The seated
figure shows
standard
orientation.
Zipper in Back
Front