Rocktron Velocity 250 - Manual (Page 6)

3
Front Panel
Front Panel
This switch powers up the Velocity 250.
This control determines the output level for Channel 1.
This control determines the amount of Reactance for Channel 1. As this control
is turned clockwise, the simulated output impedance is increased and the
Velocity 250 will increasingly exhibit the characteristics produced by the interac-
tion between a tube amplifier and a guitar speaker cabinet. When turned fully
counterclockwise, the simulated output impedance is at a minimum.
This control determines the level of definition for Channel 1. Turning this control
fully counter-clockwise bypasses the Definition circuit, while turning it fully
clockwise provides maximum Definition.
When switched to "BRIDGED" the Velocity 250 operates as a mono unit with
increased output power (Channel 2 becomes inoperable in this condition).
In the "STEREO" position the unit operates as a normal stereo amplifier.
This control determines the output level for Channel 2.
This control determines the amount of Reactance for Channel 2. As this control
is turned clockwise, the simulated output impedance is increased and the
Velocity 250 will increasingly exhibit the characteristics produced by the interac-
tion between a tube amplifier and a guitar speaker cabinet. When turned fully
counterclockwise, the simulated output impedance is at a minimum.
This control determines the level of definition for Channel 2. Turning this control
fully counter-clockwise bypasses the Definition circuit, while turning it fully
clockwise provides maximum Definition.
1 POWER switch
2 GAIN control
3 REACTANCE control
4 DEFINITION control
5 STEREO/BRIDGED switch
6 GAIN control
7 REACTANCE control
8 DEFINITION control