REFCO ENVIRO - Manual (Page 5)

Instruction Manual ENVIRO English
The ENVIRO has been designed to meet the requirements
of the Standard for Refrigerant Recovery Machines, ARI
and certification.
If an approved cylinder with overfill is not available always
use an approved scale to monitor the cylinders capacity.
Additionally, approved refrigerant hoses must be used
which have shut-off devices within 300mm of the ends to
reduce the likelihood of refrigerant leakage to the atmo-
sphere when changing cylinders or setups.
Product Safety:
Only a qualified technician who has been properly trained
in the care and use of such equipment and in the recov-
ery process itself must only operate the ENVIRO.
Responsibility:
The operating instructions are part of the product and
must be stored in close proximity to the ENVIRO where
they should be readily accessible to qualified personnel
at all times.
The qualified personnel must have carefully read and
understood the operating instructions prior to operating
the device.
The manufacturer shall not be liable for any damage whatso-
ever arising through improper use, failure to comply with
these operating instructions, assignment of inadequately
qualified personnel, or unauthorised modification of the
ENVIRO.
The General Terms and Conditions as set out in the sales
documentation shall apply.
Subject to technical modifications.
2