Dixon SpeedZTR 539 131188 - Manual (Page 11)

11
8 FRONT WEIGHTS
1. Center the weight box on the front face of foot
plate, as illustrated. Use the holes in weight
box as a template to mark and drill four
11 /
32
"
diameter holes in foot plate.
2. Attach the weight box to foot plate with four
5 /
16
-18 x ½" carriage bolts and 5 /
16
" nyloc nuts.
3. Install weight in weight box.
CAUTION
DO NOT operate mower with grass
catcher, unless the front weights are
installed.
7 UPPER CHUTE
1. Slide opposite flex hose end into upper chute.
2. Push upper chute through the gasketed
opening in the cover assembly.
3. Rotate flex tube and upper chute so that the
chute opening is downwards toward the
container bags.
Rotate Upper Chute
to point downwards
towards bags
ASSEMBLY
Cover Gasket
Install Weight
In Box
Weight Box