Dixon SpeedZTR 539 131188 - Manual (Page 10)

10
5 LOWER CHUTE
ASSEMBLY
CAUTION
Before removing deflector shield, turn
mower engine off.
Mower Deflector
Deflector Pin
Deflector
Mounting Bracket
1. Turn mower engine off.
2. Remove grass deflector on mower by pulling
hair pin cotter and deflector pin. Set aside to
reuse. The deflector and spring may be stored
for future use when not using the bagger.
3. Attach adapter bracket to discharge adapter
with bolts, washers and nuts as illustrated
below.
3. Align the discharge adapter into the deck’s
deflector mounting bracket and insert the
deflector pin. Secure with the hair pin cotter.
Discharge Adapter
1. Slide flex hose onto open end of discharge
adapter.
2. Thread hose clamp around flex hose and
discharge adapter. Pull tight.
6 FLEX HOSE
Hose Clamp
Discharge
Adapter
Flex Hose
Adapter
Bracket
Washer
¼-20 x ¾ Hex
¼-20 Nut