RAVE Sports Waterboggan 12 - Manual (Page 13)

 Inflate the tube and locate the leak by spraying the tube with soapy water.
Bubbles will appear where there is a leak.
 Determine the hole size and cut a circular patch ½ - 1 inch wider than the
hole.
 Remove air from the tube and dry tube completely where the patch is to be
applied.
 Peel off paper back from patch, apply repair patch to area and work out any
air bubbles from beneath the patch.
 Apply weight to the patched area for one hour before re-inflating.
 Put the bladder back into the cover.
Cleaning and Storage
 When the inflatable product is not being used, we recommend that you
store it in a covered, shaded area. This will help protect it against ultraviolet
(UV) rays and extend the life of the product.
 Clean the inflatable completely with a mild soap and fresh water. NEVER
USE PETROLEUM BASED PRODUCTS OR SOLVENTS FOR CLEANING.
 Product should be completely dry and remain dry while stored.
 Replace the insert into the rooster tail device (if applicable).
 Roll the product loosely and place in a vented storage bag or container.
 Store in a cool, dry location. Do not store product directly on concrete
surface. Place mothballs around stored inflatable to keep mice and insects
away.
 Secure the product to prevent unauthorized or unsupervised use.
13