Dixon ZTR RAM 50 - Manual (Page 38)

38
DECK REMOVAL:
1. Remove mower deck drive belt. To relieve belt
tension, insert p/n 17422 link (at front of lift
frame) into tab. Move deck lift pedal into the
highest cut position and latch in place. As a safety
precaution, insert clevis pin in nearest hole at rear
of foot pedal. Belt can now be removed from
mower deck pulley.
2. Remove front hanger pin.
3. Remove front L-Rods and remove nut and bolt
from rear chain hangers.
4. Slide deck from beneath chassis.
5. Reverse procedure to reinstall deck to chassis.
CARE & MAINTENANCE