Dixon ZTR RAM 50 - Manual (Page 14)

14
Model ZTR RAM 44 ~ RAM 50
Chassis: 1-1/2 X 3 rectangle tube side frame
Mower Deck: 44” Deck: 11 GA fabricated construction/reinforced ribs
50” Deck: 11 GA fabricated construction/reinforced ribs
Blade Drive: Electric clutch.
Transmission: Each rear wheel is independently driven by a Hydro
Gear IZT hydrostatic drive.
Engine:
Ram 44: 18 HP Briggs & Stratton ELS, 4 cycle, single cylinder,
overhead valve, air cooled, gasoline, vertical shaft, cast
iron cylinder, full pressure lube w/spin-on filter.
Ram 50: 22 HP Briggs & Stratton ELS, twin cylinder, overhead
valve, air cooled, gasoline, full pressure lube with oil
filter, vertical shaft, aluminum head & block with cast-
iron cylinder liners.
Starting Electric-key switch operation w/safety interlock blade
System: drive.
Tires: Front 11 x 4.00-5 ribbed tread (16-21 PSI)
Rear 18 x 8.50 x 8 4 ply turf tread (8-14 PSI)
Capacities: Fuel 11 gallons approximately
Engine Oil Ram 44 - 1.5 quarts
Ram 50 - 2 quarts
Dimensions: Width 44” maximum track width
Height 39” to top edge of seat
Length 69” hitch tab to front bumper
Weight power unit: 474 lbs
with 44” deck 600 lbs
with 50” deck-620 lbs
Note: Additional information provided in service instructions under the
individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
SPECIFICATIONS