RAVE Sports 7' Iceberg - Manual (Page 14)

Step 7 – Allow repair to cure for 24 hours before re-inflating.
Step 8 – Inflate the repaired product.
TIP – It is a good idea to check again for leaks. If you have multiple
leaks, the air will rush out of a larger hole before a smaller one.
CAUTION: When using glue, remove unused glue from threads of tube
and cap and carefully replace the cap on the tube. If properly sealed it will
keep perfectly.
•
Do not leave the tube in the sun or next to heat sources or direct
flames.
•
Check that the room is properly ventilated, avoid inhaling or
ingesting the glue and avoid contact with skin.
•
For major repairs, take your product to your local dealer or
manufacturer.
13