RAVE Sports 7' Iceberg - Manual (Page 10)

EZ Up Platform 7’ Iceberg
Line up the EZ Up to the product by placing
both units against each other and lining up the
loops on each side. Unit must be on level
ground to attach. It may be easier to attach to
the unit before inflating.
Thread the tube through the loops. Then thread the
included string through the PVC tube and caps.
Attach tube caps and tie the string on either end
of the tube cap leaving approximately 3” to 4” of
excess on both sides. Cut off any remaining
excess.
DEFLATION
PRIOR TO DEFLATION, REMOVE ALL CHILDREN FROM THE UNIT!
Use one of the Inflator/Deflator devices recommended in the
“Inflation” Section for faster deflation.
Halkey Roberts Valve - Unscrew the cap by twisting counterclockwise to
expose the air valve stem. Open the air valve by pushing in the stem and
rotating clockwise. Allow air to escape. Pushing on the stem and rotating
counterclockwise will seal the valve. Replace cap making sure it is
tightened securely.
9