RAVE Sports Pontoon Slide - Manual (Page 7)

Assembling your Pontoon Slide
Step 1
Make sure the side gate and railing of pontoon boat are
free of sharp objects, your water depth is at a minimum of
8 feet and the pontoon is securely anchored. Ensure the
railing is secure and stable with a height between 21 to 30
inches.
Do not use if your railing does not meet these
requirements.
Place deflated Pontoon Slide over locked side
gate of the pontoon boat.
The climbing portion should be on the inside
of the boat and the slide portion should be
draped over the outside of the boat.
It is preferred for the slide to be
attached to the side with more of a
confined space; such as between a
seat and driver’s console as shown.
The minimum width clearance you
will need is 30 inches (Note: the slide
will be tight at this dimension. 34” is
preferred for normal clearance).
Step 2
Connect the pump provided with the
Pontoon Slide to the battery of your
pontoon.
The red clip of the pump should connect to
6