RAVE Sports Pontoon Slide - Manual (Page 6)

• Use the Pontoon Slide only under mature, knowledgeable
adult supervision.
IMPORTANT:
FOR PONTOON BOAT USE ONLY. DO NOT
ATTEMPT TO USE ON DECKBOATS, RUNABOUTS, FISHING
BOATS OR OTHER CRAFT.
BEFORE ASSEMBLING OR USING YOUR SLIDE, MAKE SURE
YOUR PONTOON MEETS THE FOLLOWING CRITERIA:
1.
A secure side railing with a height of 21-30 inches from the
deck to the top of railing.
2.
Vertical rail supports that are 16-54 inches on both sides of
the intended slide mounting location.
3.
Minimum 30 inches width clearance so the slide can rest
squarely on the pontoon deck. NOTE: The gate itself can be
smaller than this. See page 6 for further explanation.
These criteria must be met in order for the pontoon slide to be
securely fastened to the pontoon. If your boat does not meet these
criteria, do not attempt to use the product.
5