RAVE Sports Splash Zone Plus 12' - Manual (Page 18)

Step 7 – Allow repair to cure for 24 hours before re-
inflating.
Step 8 – Inflate the repaired product.
TIP – It is a good idea to check again for leaks. If you
have multiple leaks, the air will rush out of a larger hole
before a smaller one.
CAUTION: When using glue, remove unused glue from
threads of tube and cap and carefully replace the cap on the
tube. If properly sealed it will keep perfectly.
Do not leave the tube in the sun or next to heat sources or
direct flames.
•
Check that the room is properly ventilated, avoid inhaling
or ingesting the glue and avoid contact with skin.
DO NOT RETURN YOUR PRODUCT TO THE RETAILER.
CONTACT RAVE SPORTS FOR WARRANTY, REPAIR, AND
RETURN INFORMATION.
17