RAVE Sports Bongo 10 Bouncer Water Park - Manual (Page 8)

vacuum for inflation. Insert the adapter into the air valve and lock
into place by turning clockwise.
Inflate until the tube is firm and resistant to pressure. Your fist
should create only a slight depression when pushed against the tube
and the surface should be stretched taut in all directions. Replace cap
to ensure an air tight seal.
NOTE:
It is normal for the air pressure within the tube to fluctuate
depending on air and water temperatures. It may be necessary to
increase or decrease the air pressure in your product accordingly. To
avoid damage on extremely hot days it may be necessary to check
and release the air pressure from your product throughout the day.
C A U T I O N
DO NOT OVER-INFLATE.
Do not exceed 2 PSI if filling with compressed air.
Excessive pressure can cause the tube to rupture with
potentially damaging force to eyes, ears, skin and limbs.
Use of an air compressor or over-inflation can rupture
the tube beyond repair, thus voiding the warranty.
!!
7