RAVE Sports Bongo 10 Bouncer Water Park - Manual (Page 13)

Repairs
For large holes, tears or seam failures, contact RAVE Sports Customer
Service at 1-800-659-0790. Additional patches may be purchased at
www.ravesports.com. For minor holes or tears:
 Inflate the product and locate the leak by spraying the tube with
mild soapy water.
 Determine the hole size and cut a patch 1-2 inches wider than the
diameter of the hole. Make sure all corners of the patch are
rounded.
 Deflate the product and clean the patch and area around the hole
with rubbing alcohol. Let dry completely.
 READ AND UNDERSTAND THE WARNINGS ON THE GLUE
CONTAINER.
 Apply glue to the patch and the area around the hole. Let the glue
dry until it is tacky to the touch.
 Lay the product on a flat, hard surface and apply the patch.
Working from the center to the outer edge, rub out any air
bubbles between the patch and the product.
 Let the patch dry for at least 24 hours before attempting to
inflate the product.
12