2 on-screen display operation (osd), Osd configuration page – Raloy RNX119 User Manual

Page 10

All LED touch buttons in WHITE light.

The LED of Power touch button will flash continuously when there is no signal input.

Exit the OSD screen. Go back to the previous on-screen sub-menu or

main menu

Scroll through menu options and adjust the displayed control

Display the OSD menu. Press Enter key to select screen

Turn the monitor on or off

Membrane Switch

Function

Note:

1. All LED touch buttons turn off after 10 minutes of idle status (except the Power ).
2. Light up all membrane buttons, please press any button for 1-2 seconds (except the Power ).

3-2 On-screen Display Operation (OSD)

OSD Configuration Page

Image:

for the brightness, contrast, color temp, red, green, and blue

Geometry:

for the auto adjust, H position, V position, phase and clock

Video:

for the colour, tint, sharpness, noise reduction, DCDi and TV Setup

Audio:

for volume, bass, treble, balance, AVL and mute

Misc:

for the language, OSD position, graphic mode, ratio, reset and timer