Using the microphone flag – RODE Microphones Reporter User Manual
Page 9

- 9 -
Using the Microphone Flag
• To install your microphone fl ag, place the mesh head of
the Reporter through the ring on the fl ag, with the RØDE
logo centred. Push the fl ag down until it ‘clicks’ in place
into the groove on the microphone head. Ensure it is
properly secured by giving the fl ag a few light agitations
with your hand.
• To remove your fl ag, gently press the edges of the
protruding ‘tabs’ on the fl ag to give the ring some leeway.
Pull fl ag upwards to remove from the Reporter.
139-950-1-2_Reporter_manual.indd 9
139-950-1-2_Reporter_manual.indd 9
15/10/2012 10:00:21 AM
15/10/2012 10:00:21 AM