RODE Microphones NTG1 - Manual (Page 6)

- 6 -
• The NTG-1 comes complete with a heavy duty
stand mic holder for mounting the microphone on
any compatible stand with a 3/8” or 5/8” thread.
• Install as shown by pushing the mic in on an angle
coming from the back. You will notice the holder
is quite fi rm, and this is intentional so that the
the NTG-1 will not come out easily, which could
damage the mic.
• Make sure you do not block the slots on the side
of the mic (Fig 3) as blocking these will affect the
sound quality and the polar pattern (directional
qualities).
Mounting the NTG-1