RODE Microphones HS1 - Manual (Page 11)

- 11 -
A D J U S T T H E H E I G H T O F T H E H S 1
To place the retainer at the ideal position just below and behind
the ear lobe, change the position of the retainer on the headband
wire. To re-position, loosen the retainer cap using the screwdriver
provided in your HS1 case. You will not need to unscrew the
retainer cap completely to allow movement. Once satisfi ed with the
height of the retainer on the headband, tighten the retainer cap
back in place.
FI T T I N G YO U R H S1
- 11 -
Loosening the retainer cap with provided RØDE screwdriver
RETAINER CAP
117-950-3-1-HS1_manual.indd 11 117-950-3-1-HS1_manual.indd 11 28/11/2012 3:48:10 PM 28/11/2012 3:48:10 PM