Lubrication – Dixon SpeedZTR 966494901 User Manual
Page 41
LUBRICAtIon
41
General
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be filled with
engine oil.
When lubricating with grease, unless otherwise stated,
use a high grade molybdenum disulphide grease.
For daily use, the machine should be lubricated twice
weekly.
12/12.every.year
1/52.every.Week
1/365.every.day
Lubricate.with.grease.gun
oil.change
Filter.change
Lubricate.with.oil.can
Level.check
8058-072
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts
or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt
continues to slip after cleaning, it must be replaced.
Gasoline or other petroleum products must not be
used to clean belts.
- 7000 (40 pages)
- Grizzly ZTR KOH/968999627 (88 pages)
- Speedztr 36 (52 pages)
- 44 (52 pages)
- 36/968999609 (80 pages)
- KODIAK ELS 60 (52 pages)
- SPEEDZTR 42 (52 pages)
- 503 (33 pages)
- 966503601 (60 pages)
- Zeeter 14295-0804 (52 pages)
- SpeedZTR 965882401 (75 pages)
- SpeedZTR 16134-0803 (48 pages)
- RAM MAG 50 / 968999561 (88 pages)
- Kodiak 965871801 (72 pages)
- ZTR Mowers (11 pages)
- ZTR 5423 (70 pages)
- 27 KOH/968999588 (88 pages)
- 17823-0704 (56 pages)
- 700 Series (21 pages)
- 8000G Series (44 pages)
- ZTR 8025 (44 pages)
- ZTR 5502 (72 pages)
- Ram Ultra 966985401 (64 pages)
- 966495401 (72 pages)
- SpeedZTR 46BF (64 pages)
- SpeedZTR 539 131301 (15 pages)
- Kohler 968999725 (72 pages)
- Zeeter 16246-0803 (48 pages)
- Generic (11 pages)
- 3000 Series (38 pages)
- ZTR423 (16 pages)
- TECHNICAL DATA BROCHURE ZTR 361 (8 pages)
- 539130212 (27 pages)
- 1001 (41 pages)
- 72 - 27 KOH (52 pages)
- ZTR 6025 (40 pages)
- 5421 (43 pages)
- SPDZTR 30 BF (60 pages)
- 13089-0601 (60 pages)
- 4500 Series (48 pages)
- SilverTip ZTR 60 (56 pages)
- 502 (36 pages)
- 2000 (40 pages)
- GRIZZLY 60 KOH/968999590 (52 pages)
- D22H46 (30 pages)