Peg-Perego Primo Viaggio Convertible 2014 User Manual

Page 39

- 39 -

4. Attach the lower connectors to the lower

anchors of your vehicle located at the joint

line between seat and backrest. Check your

vehicle owner’s manual to learn what is the

best place for your car . When the LATCH

straps are connected to the lower anchors, an

audible click will be heard. If this is not the

case, repeat the operation and double check

that the latch is attached and working by

trying to pull the lower connector away from

the lower anchor.

5. Push down the child restraint (A) into the

seat with your own body weight and at the

same time pull the strap ends (B) in order

to tighten the latch straps. Check that the

connectors are evenly tightened and that the

seat is not leaning sideways.

6. Picture shows the correct strap path when

the child restraint is attached to the vehicle

using the LATCH connectors.

Verify that the child restraint is secure. A

secure child restraint will not move more

than 1 inch near the LATCH anchors.

Installing your child restraint in the vehicle - Forward Facing mode