Peachtree Audio deepblue User Manual

Page 6

LED Status:

manual to link to the player. Typically, Bluetooth controls are

3. Search the device name “Peachtree BT ” on your Bluetooth device

listed and select it as your audio speaker.

is established.

5. Pairing remains intact even when the player or the Bluetooth

auto link with the last linked device when that device is in range.

Pairing your other Bluetooth

device

Previously Paired Devices:

Bluetooth

device, press and hold the [

[ PAIRING ]

the remote control for 2 seconds and repeat the above steps for
pairing your other Bluetooth

Once the device is paired the blue light will turn oﬀ after 15
seconds

aying Bluetooth

Music

1. Once your device and the player are linked you can start to play

Bluetooth

music through the player.

2. Turn on the player and press the [

[ Bluetooth

]

control to select the Bluetooth

mode, Blue light indicates for

Bluetooth

mode.

4. Press the [

]

5. Press the [

]

immediately to skip the previous track.

6. Press the [ ]

Press again to resume it.

7. Press the [

]

[

]

adjust the system volume.

Note:

If the pairing is unsuccessful, re-pair your Bluetooth

device with the

player and repeat the above steps.

Flashing quickly – No device paired
Flashing Slowly – Device pairing
Steady ON – Device paired

1. If you are using a smartphone as your source the audio playing will be
interrupted when there is an incoming call or when the user makes
a call.

ﬁnished.

Bluetooth

-enable device.

NOTE: Depending on the Bluetooth

device you are using, you may

need to manually go into media player mode on your device to control