Peachtree Audio deepblue User Manual

Page 5

Power

9. Bluetooth

switch

10. Mute
11.

12. Bass+
13. Bass-
14. PAIRING
15. AUX switch
16.

Play / Pause

17.

18. VOL+ (Volume up)
19. VOL- (Volume down)

REMOTE CONTROL

REMOTE CONTROL BATTERY

1.
2.
3.
4.

To power the player ON:
1. Plug AC cord into AC jack, and plug into a live AC wall outlet.
2. Press the [

or the [ Power ]
player to ON mode.

3. Press and hold the [

top panel for 1 to 5 seconds or press the [ Power ]
remote control to switch the player to Standby mode.

Note: To save power, the player will switch to economic standby mode
when the speaker is idle for 12 hours.

Before your start:
Your Bluetooth device (cellphon e, MP3 player, computer, etc.)

please refer to your Bluetooth device’s user manual for details on

Bluetooth pairing / searching / setup

to set the device’s

mode.

Pairing your Bluetooth device with the player
1.

Please Note: Maximum broadcast distance for Bluetooth in open
space is typically 33 feet. Walls and other obstructions may reduce
this distance significantly

Press and hold the [

top panel for 5 seconds or the [ PAIRING ]