Peachtree Audio Nova - Manual (Page 8)

The Nova remote control is straightforward, easy to use, and el-
egantly designed. You remove a screw on the back to replace dead
batteries. We suggest that after you manually turn the Nova “on”,
that standby be your default position when the Nova is not in use.
It will not damage the unit or wear the parts out more quickly than
being completely “off”.
On/Standby: This button switches
Coax 1 & 2: These buttons select a
digital audio source at the Coaxial
digital connection.
Opt 1 & 2: These buttons select a
digital audio source at the Optical
(or Toslink) connection.
Mute: This button will mute the
Nova.
1)
Volume + - : These buttons will
increase and decrease volume levels.
The motorized volume control has
an LED indicator for easy level
viewing from a distance.
3)
USB: This button selects a digital
audio source at the USB connection.
2)
4)
5)
6)
7)
between “standby” and On” . When
in standby the Nova draws very little
voltage. We recommend turning the
Nova off by leaving it in standby.
Tube: When engaged, this button 8)
will bypass the tube in the preamp
circuit allowing for Solid State
performance.
1 6
2 4 4
5 5 7
7 7 8
3 3
Aux 1,2,and 3: These are your three
standard line level inputs. See Back
Panel page for an explanation of the
Home Theater bypass.
5
R e m o t e
C o n t r o l