3 s-register definitions – D-Link DFM-560EL User Manual
Page 66
D-Link DFM-560EL External Modem User’s Guide
66
8.3 S-Register Definitions
Sr=n Set Register r to n
Sr? Display contents of S-Register
S0 Number of Rings to Auto-Answer
The number of ring the modem waits for before it auto
Answers.
Range 0-255 (rings)
Default 0 (Country dependent)
S6 Wait Time before Blind Dialing
The time to pause after off-hook before blind dialing.
Range 2-255
Default 2 (Seconds, Country dependent)
S8 Pause Time For Dial Delay
The time to pause for the pause dial modifier, “Comma”
Range 0-255
Default 2 (seconds)
S9 Carrier Detect Response Time
The time a signal is detected an qualified as a carrier.
This timing lets your modem ignore spurious signals
that are the same frequency as the carrier. Higher S9
Values reduce the chance of a carrier being detected.
Ranges 1-255
Default 6 (0.6 seconds)
S10 Lost Carrier To Hang Up Delay
The time the modem waits before hanging up for carrier loss.
Range 1-255
Default 14 (1.4 seconds)
S11 DTMF Tone Duration
The time for DTMF tone dialing and the time between the tone
Spacing.
Range
5-255
Default 95 (ms, Country dependent)