ParkZone PKZU1580 - Manual (Page 9)

9
Aileron
Rudder
Control Direction Test, continued
The transmitter (MLP4DSM) included with
the T-28 is the same transmitter included
in other Ultra Micro RTF versions. It also
functions identically to the transmitter
included with the E-fl ite mCX and mSR.
Note: Refer to any other transmitter’s manual
for reversing instructions.
Should the T-28’s electronic components
be used in another aircraft, you may fi nd it
necessary to reverse the operation of fl ight
control surfaces. See Servo Reversing in your
transmitter manual.
1. Be certain the battery is unplugged from
the aircraft and the transmitter is turned off .
2. Press and hold the digital trim button for
the surface you would like to reverse.
3. While holding the digital trim button, turn
the transmitter on.
4. Hold the digital trim buttons down for
approximately 5 seconds until you hear a
tone,
confi rming the selection.
5. Connect the fl ight battery and complete
the
fl ight control test. Confi rm all surfaces
operate in the correct direction.
Reverse Controls
Elevator
Normal Aileron
Normal
Aileron
Reversed Rudder
Normal
Rudder
Reversed
Elevator
Reversed
Elevator
Normal
EN