Paradigm Millenia CT Upgrade Kit - Manual (Page 2)

About Paradigm Virtual Surround?
Typically in a 2.1 system, all the audio magic of Dolby Digital or DTS Digital
surround information is lost, since there are no surround speakers to deliver
it. This precious information sits in the front left and right speaker channels
wondering what to do with itself.
Using sophisticated mathematical algorithms, Paradigm Virtual Surround
processing gathers that neglected surround information in a central sweet spot
then reflows it into the front left and right channels. It’s then sent out into the
room in a way that creates the auditory illusion of sound enveloping the listeners
on all sides. An ‘illusion’ perhaps, but to our ears, designed to hear in three
dimensions, this spacious, ambient sound that swirls around us is very real.
IR Learning
Enabling IR Learning on Millenia CT 2
1. To enable IR Learning on Millenia CT 2, press and hold the ‘MUTE’ button
for 5 seconds on either the remote control or the control box. The LED
on the front of the control box will glow a brighter ‘BLUE’. This indicates
Millenia CT 2 is now in IR Learning Mode.
2. Using either the remote control or the control box press the command you
would like Millenia CT 2 to learn.
For example: If you want the Millenia CT 2 to learn the ‘VOLUME +’
command, press ‘VOLUME +’. The LED on the front of the Control Box will
flash ‘BLUE’ slowly, this indicates that the Millenia CT 2 is in the process of
learning a command.
3. Press the corresponding button on the 2nd remote control to learn the
command.
EN 2