beautypg.com

OPTI-UPS TS2250B User Manual

Page 2

background image

OPTI-UPS USA:
Tel: +1-909-869-5700
Fax: +1-909-869-5730
Toll Free: (888) OPTI-UPS
[email protected]
http://www.opti-ups.com

OPTI-UPS UK:
Tel: +44 0208 622 3083
Fax: +44 0208 622 3200
[email protected]
http://www.opti-ups.co.uk

OPTI-UPS Europe:
Tel: +49-89-3715-6420
Fax: +49-89-37156-4229
[email protected]
http://www.opti-ups.de

OPTI-UPS Czech:
Tel: +420-604-444077
Fax: +420-604-444077
[email protected]
http://www.opti-ups.cz

OPTI-UPS Australia:
Tel: +61-3-9545-5322
Fax: +61-3-9545-5669
Toll Free AU: 1800-678-428
[email protected]
http://www.optiups.com.au

OPTI-UPS Middle East:
Tel: +9714-8819-838
Fax: +9714-8819-938
[email protected]
http://www.opti-ups.com

OPTI-UPS Panama:
Tel: +507-4415668
Fax: +507-4416851
[email protected]
http://www.opti-ups.com

OPTI-UPS Asia:
Tel: +886-2-2246-7272
Fax: +886-2-2246-7312
Toll Free: 0800-029898
[email protected]
http://www.opti-ups.com.tw

Troubleshooting

Problems Possible

Cause

Solution

Power switch not pressed
long enough

Press the power switch for more
than 1 second until the UPS
turns on

Battery voltage is less
than 10V

Recharge the battery for 6 hours
by leaving the UPS plugged in
and the load disconnected from
the UPS.

Load is less than 20W at
battery mode

Disable “No Load Shutdown
Function”

UPS can’t turn on,
LED does not light

PCB failure

Call for service

Input power cord is loose

Plug in the power cord firmly

Busted input fuse

Replace the fuse

Input voltage too high or
too low

Check input voltage

UPS always at battery
mode

PCB failure

Call for service

Battery is not fully
charged or defective

Recharge the battery for 6
hours. If the problem is still
present, replace the battery.

Back up time too short

PCB failure

Call for service

Buzzer continuously
beeping

Overload Remove

some

loads

Contact Information

Warranty


LIMITED WARRANTY
What the warranty covers:

We guarantee this product to be free from defects in material and workmanship during
the warranty period. If a product proves to be defective in material or workmanship
during the warranty period, we will at our sole option, repair or replace the product
with a like product.

How long the warranty is effective:

For accurate warranty period and conditions, please contact the local branch offices or
your dealers.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modified or

removed.

2. Damage, deterioration or malfunction resulting from:

a) Accident, misuse, neglect, fire, water, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the
product.

b) Repair or attempted repair by anyone not authorized by OPTI-UPS.
c) The fault is the result of accidental damage or damage in transit or

transportation, including but not limited to liquid spillage.

d) Removal or installation of the product.
e) Causes external to the product.
f) Use of supplies or parts not meeting our specifications.
g) Normal wear and tear.
h) Any other cause which does not relate to a product defect.

3.

Removal, installation and set-up service charges.

Limitation of implied warranties:
There are no warranties, expressed or implied, which extend beyond the description
contained herein including the implied warranty of merchantability and fitness for a
particular purpose.
Exclusion of damages:
Our liability is limited to the cost of repair or replacement of the product. We shall not
be liable for:

1. Damage to other property caused by any defects in the product, damages based

upon inconvenience, loss of use of the product, loss of time, loss of profits, loss
of business opportunity, loss of goodwill, loss of data, loss of software, costs of
substitute equipment, interference with business relationships, claims by third
parties, or other commercial loss, even if advised of the possibility of such
damages.

2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.

Specifications


Model

Thunder Shield 1250(B)

Thunder Shield 1700(B)

Thunder Shield 2250(B)

Maximum Capacity

600W

900W

1200W

Topology Line-interactive
On-battery Output Waveform

Simulated Sine Wave

Input Voltage Range

110/120V or 220/230/240V +/- 25%

Input Frequency

50Hz/60Hz Auto Sensing

Output Voltage Regulation

Rated voltage +/- 5%

Communication Port

RS232

*)

Data Line Surge Protection

RJ11/RJ45

*)

Surge Energy Rating

480 Joules

Recharge Time to 90%

6 hours

Operating Temperature

0~40 / 32~104

Storage Temperature

-20~60 C / -4~140

Relative Humidity

0 to 95% maximum, non-condensing

Audible Noise

<40 dBA

Unit Dimensions (L W H), mm

382Ч130Ч192

Net Weight, kg

13.4 (14.8)

15.9 (17.3)

EMC/RFI Compatibility

CE

Safety Certifications

CE, UL, cUL

*)

TS-B models only

This manual is related to the following products: