Instructions for setup – NEMO Equipment ESPRI 3 User Manual
Page 9
®
INSTRUCTIONS FOR SETUP
Press the ball ends of poles into the fittings (Jake’s Feet) at the
corners of the inner tent. Attach the black clip at the center of
the mesh to the clear swivel between the main poles.
Jake’s Feet and Center Swivel
Stake Corners (optional)
Secure the corner anchors by pounding the stakes into the
ground with a rock or hard object. If the ground is too hard,
trap the stakes under a rock or another heavy object.
Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.
To contact NEMO Customer Service
Email: [email protected]
Phone: 800-997-9301
©2010 NEMO Equipment, Inc.
ESPRI 3P™
1
2
3
4
5
Clips and Pole Sleeves
Attach the inner tent to the main poles with clear clips. Slide the
ridge pole through the front pole sleeve keeping the ridge pole
on the outside of the main poles.
Secure Ridge Poles
Snap ends of ridge pole in ball caps on sides of tent. Align plastic
rings on ridge pole above the intersection hub and press down
into place. Attach black clips on the mesh tent to the hub bottoms.
Attach Fly and Vestibule
Clip the corners of your tent fly to the Jake’s Feet and pull firmly on
the adjustable corner anchors. Zip on chosen door/vestibule and
stake in place. Guy-out sides for extra space and ventilation.