Instructions for setup, Meta 2p – NEMO Equipment META 2 User Manual
Page 9

®
Insert Trekking Poles
Slide the handle of the trekking pole into the reinforced pocket at
the top of one door. Insert the trekking pole tip into the grommet
near the center of the door. Repeat with opposite side.
Stake Corners
Secure the corner anchors by pounding the stakes into the
ground with a rock or hard object. If the ground is too hard,
trap the stakes under a rock or another heavy object.
Connect Vestibules and Extend Trekking Poles
Connect the side release buckle to the webbing anchor and
extend the trekking pole upwards for maximum tension.
Repeat with opposite side.
Guy-out Tent and Vent
Stake the reflective side vent cords to promote airflow.
Adjust the tension on the side vents and vestibules to
ensure maximum water shedding and wind resistance.
Tension webbing strap straight out from the center of the door
making sure not to distort the bottom of the tent. Stake in place.
Repeat for webbing strap on opposite side of the tent.
Stake Webbing Straps
Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.
©2010 NEMO Equipment, Inc.
1
2
3
4
5
To contact NEMO Customer Service
Email: [email protected]
Phone: 800-997-9301
META 2P
™
INSTRUCTIONS FOR SETUP