Instructions for setup, Astro – NEMO Equipment ASTR AIR User Manual

Page 2

Inflate

Adjust Firmness

With the valve closed, lay on the pad to test the comfort. Add or release air to adjust the
firmness of the pad.

Insert into Pillowtop™

[optional]

If using with a Pillowtop™ cover, insert Astro Air™ through the Velcro® opening.
Make sure the pad is beneath the foam layer and the microfiber fabric covers the top
of the sleeping pad. Pull the inflation valve through the opening in the Pillowtop™.

Packing Away

To deflate, open the valve and roll out as much air as possible. Unroll pad, fold edges
towards the center to reduce pack size, and roll again. Close the valve once all air has
escaped , and insert the pad into its stuff sack.

Care and Repair

To repair a leak, first clean and dry damaged area. Submerge the inflated pad in water
to help locate leaks. With pad deflated, adhere a fabric patch from the repair kit using a
urethane-based adhesive. This type of adhesive, such as Seam Grip® or Aquaseal®, can
be found at your local outdoor store. Spot clean pad with mild soap and water.

To open the valve, twist counter clockwise and pull. Use your mouth or Disco™ Pad
Pump to inflate the pad until it is difficult to add air. Twist the valve clockwise and
push to close. [Hint: Push the valve in at any point during inflation to prevent air
loss.]

Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.

To contact NEMO Customer Service

Email: [email protected]

Phone: 800-997-9301

ASTRO

™

SERIES

INSTRUCTIONS FOR SETUP