NEMO Equipment TENSH - Manual (Page 4)

Optional Accessories
1. Pawprint™: The Pawprint™ is a removable liner
perfectly sized to fit inside your tent. It has the dual
function of protecting your tent floor from boots
and paws, and of adding serious comfort. The
Pawprint™ is made of a machine-washable brushed
polyester that is very soft to the touch. Place your
sleeping pads between the Pawprint™ and floor to
help them stay in place. With a clean, soft Pawprint™
under you, you might be able to save some weight
and travel with a lighter sleeping bag or blanket.
2. Removable Insulated Floor™ (RIF™): RIF™ is a
removable closed-cell EVA foam floor pad custom
fitted for Tenshi™. This insulating pad makes a tight
fit inside Tenshi™, offers a first layer of defense
against the cold ground, and eliminates cold spots
between sleeping pads.
To seam seal your tent, first locate the areas highlighted above. These locations
include pole wraps, the STAT™, and vent seams. Clean any dirt or moisture off
the surface. Carefully squeeze the Seamgrip® through the applicator tip onto
the stitching. Use only enough to completely cover the stitching. Be careful
not to contaminate zippers and Velcro®. Allow at least 24 hours for curing
before use. If the Seamgrip® remains tacky, you can lightly dust the fully cured
Seamgrip® with talcum powder.
Outside Pole
Wraps
(10 Total)
Sleep Tight
Anchor Transfer™
(STAT™)
Vent and Door
Seams
(2 Total)