Tenshi ™ innovations – NEMO Equipment TENSH User Manual
Page 2

1. Front Door Tie-Backs
2. Reinforced Corner Pockets
3. Removable Condensation
Curtain™
4. Door/Vestibule Zipper
5. Internally Deployable Vents
6. Pressure Porting™
7. Multiple Guy-Out Points
8. Triangulated Guy-Out Points
9. Sleep Tight Anchor Transfer™
(STAT™) System
10. Rear Window/Escape Hatch
with Integral Vent
11. Snow Skirt
12. UVX Window
13. Vestibule Door Tie-Backs
14. Zipper Attachment to Tent
3
4
5
6
7
8
1
14
2
10
9
12
11
13
3
4
5
6
7
8
1
14
2
10
9
12
11
13
TENSHI™ Innovations
1. Condensation Curtain™: normal breathing will
create a good deal of moisture inside your tent. Most
will escape through the breathable tent shell, but
as with all tents, some moisture may condense on
the surface. The Condensation Curtain™ helps keep
moisture and frost contained in a small portion of
the tent. Use the vents and the front door to keep
as much of the moisture moving out of the tent as
possible. The curtain also has its own tie-back loop
if you want to hold it out of the way. Because it is
attached with Velcro®, simple remove and shake
off moisture in the morning.
2. Sleep Tight Anchor Transfer™ (STAT™): when
you pitch your Tenshi™ on narrow ledges or other
high exposure areas, STAT™ provides a waterproof,
convenient, and direct method of transferring
your anchor into the tent. This reduces the amount
of slack in the system without compromising the
weatherproofness of the tent.