DeVilbiss JGA-614FWH-186B - Manual (Page 2)

2 © ITW Ltd 2001
Operation Manual
JGA – Suction Feed Spraygun
Important
Read and follow all instructions and Safety Precautions before using this
equipment
Description
The JGA Suction Feed Spraygun Kit is suitable for use with most solvent
based coating materials. Nozzles and Needles are available in Stainless
Steel.
Important: These guns are not designed for use with highly corrosive and/
or abrasive materials and if used with such materials it must be expected
that the need for cleaning and/or replacement of parts will be increased. If
there is any doubt regarding the suitability of a specific material contact
your local Distributor or ITW Finishing direct.
Declaration of Conformity
We, ITW Finishing UK, Ringwood Road Bournemouth Dorset
England declare under our sole responsibility that this product is in
conformity with BS EN 292: parts 1 and 2 :1991 and BS EN
1953:1999, following the provisions of the Machinery Directive
89/392/EEC.
B. Holt, General Manager
E E
Model Part Number
Example: JGA-614FWH-186B
Fluid Tip Size
Aircap No
Kit Number
Nozzle Material
H = 303 Stainless