Using multiple transmitting stations – DAVIS 6322C User Manual
Page 14
Troubleshooting Wireless ISS Reception
12
Transmitter ID DIP Switches in Top-right Corner of SIM
To change to another ID, use a ballpoint pen or paper clip to toggle DIP switches
#1, 2, and 3. The settings for Transmitter IDs 1 - 8 are shown in the table below.
Set the Vantage Pro2 console to the same ID as the transmitters, as described in the
Vantage Pro2 Console Manual.
Using Multiple Transmitting Stations
This table shows the maximum number of each type of station that can be
used with a single Vantage Pro2 console.
The console can receive signals
from a total of up to eight transmitters (stations).
.
*Replaces the ISS anemometer.
**Two are allowable only if both stations are only partially populated. For exam-
ple, a network can either have both a Leaf Wetness/Temperature station and a Soil
Moisture/Temperature station, or it can have one combined Leaf Wetness and Soil
Moisture/Temperature station.
ID C
ODE
S
WITCH
1
S
WITCH
2
S
WITCH
3
#1
(default)
off
off
off
#2
off
off
ON
#3
off
ON
off
#4
off
ON
ON
#5
ON
off
off
#6
ON
off
ON
#7
ON
ON
off
#8
ON
ON
ON
Station Type
Maximum Number
Integrated Sensor Suite (ISS)
1
Anemometer Transmitter Kit*
1
Leaf & Soil Moisture/Temperature Station
2**
Temperature Station
8
Temperature/Humidity Station
8
1
2
3
4
ON
DIP Switches