Important safety instructions – Mighty Mule FM502 Green Board User Manual
Page 11

7
IMPORTANT SAFETY INSTRUCTIONS
These warning labels should be found at the locations
specifi ed below. If any of them are missing,
immediately contact GTO for replacements.
!
Warning signs (2 enclosed) to be installed on each side
of the gate (3—5 feet above the bottom of the gate)
Maximum Gate: 500 lb. (226.7 kg); 16 ft. (4.8 m)
Voltage: 12 Vdc; Frequency: 0 Hz; Power: 25 W
Class I, II, III and IV Vehicular Swing Gate Operator.
Serial Number: XXXXXXXXXX
#xxxxxxx
Conforms to UL 325 STANDARDS
TO MANUALLY OPEN AND CLOSE THE GATE:
1. Turn control box power switch OFF.
2. Disconnect front or rear mount from gate bracket.
3. Pull opener away from front or rear mount.
DC SWING SERIES / 500
GTO, Inc. Tallahassee, Florida USA
Disconnect operator ONLY when the control box power
switch is OFF and the gate is NOT moving.
L IS TED
US
502
UL325 SERIES
®
®
E-Z GATE OPENER
Product identification and manual operation instruction
label (1) installed on control box cover
Logo and warning labels (2) installed on each side of
opener housing
C