Meijiaxin Toys T20 - Manual (Page 5)

A12
Power
ON OFF
OPEN
Circuit Protection Devices
Trimmer Functions
It's designed to adjust the helicopter flight alignment.
1. The power light indicator of the helicopter will start to blink fast when the battery voltage of
the helicopter drops to certain level. The helicopter will be out of control. Recharge is
necessary to resume the function.
2. To protect the helicopter and prevent any risks caused by the stuck of the main rotor. The
main rotor will stop rotating and the power indicator light of the helicopter will keep blinking
fast when the main rotor is stuck or being blocked for 3 seconds. Pull the throttle joystick to the
lowest position to re-launch the helicopter.
4
When flying the helicopter, if it keeps
spinning counterclockwise, press the
right gyro trim until it stops spinning.
When flying the helicopter, if it keeps
spinning clockwise, press the left
gyro trim until it stops spinning.
Press the right gyro trim
Press the left gyro trim
A12
Power
ON OFF
OPEN
When the helicopter is
flying,push down the
right control stick, the
helicopter nose will
incline upward and flies
reversely.
Backward
A12
Power
ON OFF
OPEN
Push the right control stick
to the right and the nose
of the helicopter will be
turning right.
Turn right
A12
Power
ON OFF
OPEN
When the helicopter is
flying,push up the right
control stick, the
helicopter nose will
incline down and then
moves ahead.
Forward
A12
Power
ON OFF
OPEN