Meijiaxin Toys T20 - Manual (Page 4)

3
Hints
Select channel 1 and channel 2 and operate maximum 2 helicopters simultaneously.
Not to use the same channel by 2 helicopters at the same time.
Set the connection one by one. Otherwise, it may not be connected.
Once turn off the power. The connection procedure must be repeated to operate the
helicopter.
It is advised to select channel A if there's only 1 helicopter is playing.
Operating
Upward
Push up the left control
stick, the rotation speed
of the main rotor is
increasing and the
helicopter ascends
accordingly.
Push down the left
control stick, the
rotation speed of the
main rotor is decreasing
and the helicopter
descends accordingly.
Push the right control stick
to the left and the nose of
the helicopter will be
turning left.
Downward
Turn left
A12
Power
ON OFF
OPEN
A12
Power
ON OFF
OPEN
A12
Power
ON OFF
OPEN
2. Firstly, select the "A","1" or "2" channel;turn on the remote control and the power light of the
remote control will blink slowly; push the throttle control stick up to the top, then push it to the
bottom, the power light of the remote control will keep rapidly blinking, meaning that the
remote control is sending out connectional signal.Once signal connection is done, the power
light of the remote control will turn to constant "ON" without blinking.
3. Slowly push up the throttle stick and the helicopter takes off.