Denon Speaker SC-CX101 - Manual (Page 5)

ENGLISH
Get
ting Star
ted
Connections
Remo
ving the Speak
er Net
About the
V
entilation Holes
Specifications
CAUTION
• Be sure to turn the amplifier’s power off before connecting the
speakers to the amplifier.
• If the polarities are inverted, the phase may be off and the sound
may have no bass component, making it seem unnatural. Be sure to
connect the polarities properly.
Other Cautions
Note that the illustrations in this instructions may differ from the actual
set for explanation purposes.
The surface of the set’s cabinet uses parts made from natural wood.
The colors and patterns are thus natural and unique to each set. Note
that the surface is coated and finished based on DENON’s strict quality
standards so the set can be used without worry.
External Finish
Moving the Unit
• Do not shock this unit.
• Always check that the speaker cables disconnected before moving
this unit.
Cleaning
• Use a wiping cloth and wipe lightly to remove dirt from the cabinet
and operation panel.
• When using chemically treated cloths, follow the precautions that
have been written for them.
• Do not use benzene, thinners, or other organic solvents or insecticides
on the main unit since they may cause a change in quality or color.
• There are various types of speaker output terminals on amplifiers.
Check your amplifier’s owner’s manual.
• Raising the amplifier’s volume excessively and playing with distorted
sound could damage the amplifier and speakers. Enjoy the sound at
a reasonable volume level.
• When moving the unit, note that applying strong force to the surface
of the speaker through the saran net could damage the speaker.
Connections
When connecting, be sure to read the amplifier’s owner’s manual
carefully and connect properly.
• Connect the input terminals on the rear panel of the speaker with the
speaker output terminals on the amplifier, using the speaker cables
(Supplied).
• Connect the speaker for the left channel to the “L” terminal on the
amplifier, the speaker for the right channel to the “R” terminal on the
amplifier, making sure to check the polarities (“+” and “–”).
Once connections are completed, check that all of the short-circuiting
cords are securely connected to the terminals (“+” to “+”, “–” to “–”
on the woofer and tweeter sides).
Normal Connections
“+” side terminal: Red
“–” side
terminal: Black
Short-circuit cord Connect to
amplifier’s “+” side.
Connect to
amplifier’s “–”
side. (Plain core)
• Once connections are completed, pull gently on the speaker cables
to check that they are securely connected.
• The speaker cables can also be connected to the terminals using the
included banana plugs.
CAUTION
Do not let the core wires of two speaker cables touch each other.
Doing so will short-circuit the amplifier circuitry and damage the
amplifier.
ENGLISH
Get
ting Star
ted
Connections
1
Twist firmly the wires by hand so
thattheydonotstickoutandcause
short-circuits.
2
Loosen the terminal, insert the
cord’scorewireintotheholeinthe
terminal, then turn the terminal
clockwisetotightenit.
3
Even if nothing is connected to a terminal, turn it
clockwisetotightentheshort-circuitcord.
Sheath