Meijiaxin Toys T43 - Manual (Page 7)

Trouble shooting
Circuit protection devices
1.When the battery voltage of the helicopter drops to certain level , the helicopter will be out of
control. Recharge is necessary to resume the function.
2.To protect the helicopter and prevent any risks caused by the stuck of the main rotor, the main
rotor will stop rotating when it is stuck. Pull the upward/downward control stick to the lowest
position to re-launch the helicopter.
Problem
No reaction
from the
helicopter
1.The helicopter is underpowered. 1.Get the battery of the helicopter charged
2.The indicator light of the helicopter
flashing rapidly, and the gyo is in
the testing statement
2.Set the helicopter down to a platform, until the
indicator light turn to constant ”ON” without
blinking.
3.Repeating the connection procedure.
3.the helicopter and the transmitter
is out of radio connection
Reason Solution
TIPS
To stop shooting, please press the shooting switch on the remote controller. Directly unplug the
battery cable or take out the TF memory card from the videography module will result in loss of
the video data.
To avoid helicopter crash,please do not insert or take out the TF memory card from the
videography module,when the circuit is on. TF memory card should be installed before circuit is
on and take out after shooting switch is turned off.
When crash occurs,turn off the helicopter and then turn on the power to recover normal working.
3. After shooting is finished, take out the TF memory card from the videography module
and insert it into the card reader, then, insert the card reader into the USB interface of
the computer to watch the video.
7