Assembly – Magnepan MG 3.7 User Manual
Page 4
5. Assembly
This will require the help of an assistant. Lay the speaker face down on a
fabric-covered table, or as an alternative, carefully lay the speaker on its side.
Attach the L-shaped brackets to the oval base and to the speaker panel using
only the two bolts as shown in the diagram. Next, install the supporting braces
with the remaining 2 bolts for each bracket. To prevent cross-threading the
bolts, install by hand before using a screw-driver. Do not use power tools.
Revised 2-27–2015
Page of
4
9