LW Measurements SCT 1200 - Manual (Page 11)

11

Variable g or lb reference weight calibration software

Pieces counting

1.3 million internal resolution

60,000 display resolution

24 bit A/D processor

Highest quality sensor used

Bottom sensor support and steel thread footing
2.2 Application, conformity
2.2.1 Correct use of the weighing machine
The weighing machine may only be used for the weighing of
solid-materials and of liquids in secure containers.
The maximum allowable load of the weighing machine must
never be exceeded; otherwise the weighing machine may be
damaged.
In using the weighing machine in combination with other
appliances as well as with appliances produced by other
manufacturers, the appropriate regulations for the safe use of
the relevant attachments and their application in accordance
with instructions must be observed.
2.2.2 Conformity
The weighing machine has been manufactured and tested in
accordance with the standards and recommendations set out
in the declaration of conformity.
The power adapter produced for the operation of the weighing
machine and intended exclusively for this application complies
with the appropriate electrical protection class.