LW Measurements SCT 1200 - Manual (Page 10)

10
2.1.2 Function setting
- Turn off the weighing machine using the hard switch
located on the bottom of the weighing machine.
- Press and hold UNIT WEIGHT key and then turn on the
weighing machine. The display will show
“------“ and then “b = XX” (beeper), on the first line, A-XX
(auto off) on the second line and L = XX (backlight) on
the third line.
- Press the QTY/SET key to toggle between activating the
beeper on or off.
- Press the TARE key to select auto off time.
- Press the ZERO key to toggle between activating the
backlight On, Off, Auto(Au). To save your settings, and
begin weighing, turn the machine off and then back on
again.
- When there is no weight on the platter, press the
SAMPLE/UNIT key to select the weighing unit (g or lb).
The built-in versatile weighing programs allow you to use the
SCT-Series weighing machines not only for accurate weighing
but also for components counting.
2.1.3 Features of the weighing machine

Auto zero tracking

Low battery indication

Large LCD

Stability indication

Auto calibration

Auto back light

Unit switching g or lb