LW Measurements LWC 800 - Manual (Page 15)

15

Check the weighing machine immediately after unpacking for
externally visible damage. If you should find transport damage, please
inform your service representative immediately.

If the machine is not to be used immediately after purchase but only at
a later time, it should be stored in a dry place where fluctuations in
temperature are as small as possible (see Chapter 7 .Transport,
storage.).

Read through these operating instructions; even if you already have
prior experience with weighing equipment, before you work with the
unit and pay attention to the Safety recommendations (see Chapter 1
.Safety).
3.2 Scope of delivery
Inspect delivery for completeness immediately on unpacking all components.
Checklist for complete delivery
Component delivered present
yes / no
Weighing Machine
Folding Handle
Indicator
(4) Screws / (4) butterfly Nuts
Power adapter
Operating manual
3.3 Assembling your weighing machine
The weighing machine is delivered in partly dismantled condition. Assemble
the individual components in the following sequence:

Place your machine on a level, stable, clean, dry surface to obtain
accurate readings.

Loosen the screw on the handle.

Pull the column upward to a 90 degree angle.

Insert the column into the slot and screw into place.

Fix the indicator bracket to the column with screw and nut.

Connect the power cord to the indicator.