LW Measurements LSS 400 Large Shipping Scale - Manual (Page 4)

HOLD FUNCTION
1) Place the item on the scale platform.
2) Wait for the weights to be displayed.
3) Press the [HOLD] key. The “.” hold indicator will turn-on.
4) Remove the item from the scale platform. The item ’s weight reading will
remain on the display. You can now also convert this to other measures (i.e.
to Pounds or Kilograms) by pressing the [UNIT] key.
5) Quit hold function: Once an item is weighed and the hold function is
enabled; you want to quit to hold function, Press the [HOLD] key again to
cancel the “.” hold indicator and return the scale to weight mode.
WEIGHING
Before weighing
Whenever possible, please allow the scale to warm up for several seconds
after first turning the power on so that the scale will function properly and
accurately.
Error messages
EEEE: Overload
: Low battery
Err-Z： Exceed zero track range when turn on the power
Err- S: The scale is unstable when turn on the power
Err- C: Forget to input calibration weight when calibrating or the AD value is
too low.
Weighing procedures
1. Press [ON/OFF] to turn on the scale.
When the power is turned on, all display segments appear for a few seconds
and "0" will appear on the display.
2. Select the weighing unit with [UNIT].
Press [UNIT] to select a weighing unit "kg", "lb".
Once the unit has been selected, the selected unit will be displayed next to the
weight value.
3
3. Start weighing
If you do not use a container for weighing,
Verify the reading is "0". If not, press [ZERO] to display "0".
Place the items to be weighed on the platform.
If you use a container for weighing,
Place an empty container on the platform.
Wait for the stability weighing to be displayed and press [TARE].
Place the objects to be weighed in the container.
FUNCTION SETTINGS
1. Enter function setting mode.
Press [ON/OFF] to turn the power off, Press [HOLD] first, then press
[ON/OFF], while keeping [HOLD] pressed, the display will show A_OFF.
2. Selection of auto shut off mode.
When the scale enters function setting menu, the display will show A_OFF.
Press [ZERO] to choose ON or OFF: selection display ON, this means
auto shut off function active. Press [ZERO] again, the display will show
OFF, this means auto shut off function inactive.
3. Selection of auto backlight mode.
When the scale enters function setting menu, press [HOLD] key, the
display will show L-ON (or OFF). Press [ZERO] to choose ON or OFF:
selection display ON, this means auto backlight function active, press
[ZERO] again, the display will show OFF, this means auto backlight
function inactive, i.e. shut off backlight function.
4. Selection of auto HOLD mode.
Press [HOLD] key, the display will show H-ON or H-OFF, press [ZERO],
selection display H-ON, this means AUTO-HOLD function active, press
[ZERO] again, the display will show H-OFF, this means AUTO-HOLD
function inactive.
5. Return to weighing mode.
Press [ON/OFF] to turn the power off, press [ON/OFF] again to turn on the
power and the scale return to the weighing mode.
4