LW Measurements HRB 20001 - Manual (Page 18)

18
4.2.2.3 Setting displaying zero range
Press ON/OFF key, and when
“- - - - - - “ shows, press PCS key, and then press ZERO key multiple times
till display shows “rzd x.x”, press UNIT key to select, factory default setting is 0.8
4.2.2.4 Setting filter parameter
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “FIL.x”, press UNIT key to select, factory default setting is 2
4.2.2.5 Setting Zero range when power on
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “Pzr xx”, press UNIT key to select, factory default setting is 20
4.2.2.6 Setting Zero range of ZERO key
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “Kzr xx”, press UNIT key to select, factory default setting is 4
4.2.2.7 Setting Zero range of TARE key
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “Ktr xxx”, press UNIT key to select, factory default setting is 100
4.2.2.8 Setting overload range
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “Ovr xx”, press UNIT key to select, factory default setting is 9d
4.2.2.9 Setting Beeper
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “b2 ON” or “b2 OFF”, press UNIT key to switch it ON or OFF.
4.2.2.10 Setting ZERO and TARE function merge function
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “Zt ON” or “Zt OFF”, press UNIT key to switch it ON or OFF, in these models, it has to
be set ON
4.2.2.11 Setting Auto Shut off
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times