Quick install guide ams-1208p, Led indicators – Luxul AMS-1208P User Manual
Page 4

Quick Install Guide
AMS-1208P
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-AMS-1208P 1224140959
4
NOTE: All PoE ports are enabled as PoE+ and low priority and Max
power at 30W. This results in a 240W allocation but with the
management set to “actual consumption” the PoE units should
power up until they hit the 130W power budget limit.
LED Indicators
LED indicators show the working status of the switch. The following table de-
scribes the LED functionality:
Indicator
Name
Description
Front
Power
On
This LED indicates that there is power to the AMS-1208P
Off
If LED is off, check the power connection on the back of the unit.
System
Flashing
Indicates that the AMS-1208P is running normally.
On
Booting up or indicates a malfunction. Contact
technical support.
Off
Indicates that the AMS-1208P is in startup and initialization
process or is not on.
Link Act/
PoE Mode
Link Activity Port LED’s display Speed status
PoE
Port LED’s display PoE status
The rear panel mode LEDs for Link Act/PoE mode are the same as the front
Rear
Speed/
Link/Act
Green
The Link/Activity LED of the port will be on if there is a
1000Mbps device connected to the port.
Amber
The Link/Activity LED of the port will be on if there is a
10/100Mbps device connected to the port.
Flashing
The Link/Activity LED flashes when a port is receiving
or transmitting data.
Off
There is nothing connected to the port.